Check here occasionally for the latest support notes and Service Pack updates to DYNO-MAX 2010. If you are not under a current Priority Support Plan, contact us about discounted upgrade pricing.
“DYNO-MAX 2010 Version 10.23 (Service Pack #1) is the current release!”
DYNO-MAX 2010 version 10.23 (Service Pack #1) update is available.* It is the most powerful DYNO-MAX release ever! DYNO-MAX 2010 version 10.23 (Service Pack #1) is a free support update to 9.0, and later, licensees – under a current Priority Support Plan!
*WARNING: Only DYNO-MAX 2010 licensees under a current Priority Support Plan may legally download, install, or run this update! It is the licensees responsibility to download (applicable) updates during their plan’s period − retroactive downloading, after expiration, is not allowed.
DYNO-MAX 2010 is available on CD! The 2010 version adds dozens of new features over the older DYNO-MAX 2000 (9.38 and earlier releases). Users on a current Priority Support Plan may order the upgrade CD at no charge!
Tip: As of 3/1/2014, DYNO-MAX versions older than 10.23 SP #0 were no longer eligible for support – so upgrade today!
“Priority Support Plans” may be purchased in additional 12-month blocks. This ensures you of continued personalized phone (or e-mail) answers to your questions, and permits you to e-mail example test runs to our support engineers.
Version information, bugs, updates, and fixes (as of 9/23/2020 )
Click here to see what is new, up through DYNO-MAX 2010 version 10.23 (Service Pack #1).
Unresolved bugs, patches, or work around suggestions:There are currently no other special fixes required for the latest release – DYNO-MAX 2010 version 10.23 Service Pack #1. If you have an earlier version of DYNO-MAX 2010, please upgrade to the latest release – before troubleshooting or reporting any suspected issues!
Obtaining the DYNO-MAX 2010 upgrade
Is your dynamometer’s PC online? DYNO-MAX 2010 version 9.70 (or later) licensees under a current Priority Support Plan, and with an Internet connection on their dynamometer’s PC, may use DYNO-MAX’s “Help – Check Web for DYNO-MAX Updates…” menu selection. It automatically informs you of newer update availability! Important: Earlier versions of DYNO-MAX may experience a problem with DYNO-MAX’s “Check Web for DYNO-MAX Updates” feature. Click here for a fix.
What if your dynamometer’s PC is not hooked to the Internet? DYNO-MAX 2010 version 9.70 (or later) licensees under a current Priority Support Plan, but without an Internet connection, may follow these steps:
1) Manually download the “CD-2010.exe” installation file (see “download version…)” link below).
2) Copy that file to a USB thumb-drive (or CD).
3) Transfer that file to your DYNO-MAX equipped PC’s “desktop.”
4) Double-click that file and follow its installation instructions.
Click this “download version 10.23 SP #1 Upgrade CD files now” link (and then click Save) to begin downloading the Zipped installation file.
Tip: When asked, we suggest using your Windows Desktop for the “Save As” location of the “CD-2010.exe” zipped installation file – so you can find it easily
“CRT Not Initialized” Error Message in Windows XP
Windows Security Update KB2467174 began going out from Microsoft’s automatic Windows Update service in early April, 2011. After its installation, Windows-XP users will get a “CRT Not Initialized” error message when they try to launch DYNO-MAX 2010. Microsoft fixed this bug in a later update. The solution to repair damaged systems is to go into Windows Control Panel and use its Add/Remove Programs feature to remove “Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2467174).“
Bug-Fix for: “Check Web for DYNO-MAX Updates” feature
Earlier versions of DYNO-MAX (pre 10.00) may experience the following (specific) problem with DYNO-MAX’s “Check Web for DYNO-MAX Updates” feature: “It goes through all of the downloading process, properly restarts DYNO-MAX, but upon returning the version is NOT updated.” If this is happening to you, download our fixed “TransferUpgrade.exe” (Zipped) program. A recent Microsoft update of your User Account Control settings prevents completion of automatic upgrading. Our new TransferUpgrade.exe file should be manually downloaded, unzipped, and then saved into your DYNO-MAX folder (e.g. “C:\Program Files\DYNO-MAX”) so automatic upgrading can complete. Contact Land & Sea Support if you need assistance!
64-Bit Windows-7 and Vista Information
64-bit DYNO-MAX 2010 began shipping in January, 2010. The current version (10.23Service Pack #1) release already includes our new DYNOmite 64-bit (and updated 32-bit) USB drivers – replacing the 2.0 versions. Current users, of versions 9.70 and later, may upgrade via DYNO-MAX’s “Help – Check Web for Updates…” feature. Alternatively, the 64-bit (and 32-bit) DYNOmite USB Drivers installer package may be downloaded separately by clicking this link.
Tip: If you have a DYNO-MAX 2010 CD, version 10.00 or later, of downloaded the current DYNO-MAX 2010 version upgrade (from this support page) you already have the latest drivers. In that case, you do not need to download this driver-installation package!
Attention 9.939 thru 9.999 Beta Testers!
Were you a pre-9.90 DYNO-MAX 2010 Beta tester? If so, you should update to the latest version 10.23 (Service Pack #1) to take advantage of the expanded feature set and stability. Beta versions are no longer being supported. Registered beta testers should contact support to obtain their free  CD (or e-mailed files).
Important: This notice is for Beta version 9.72 SP #0 users (only) updating to any later release! There was a mix up in the four column assignments for the Run Information – Vehicle tab’s Driveline Power loss, Driveline % loss, Dyno Power loss, and Dyno % loss fields. Contact Land & Sea for help on repairing any affected runs (captured using 9.72). Our support team will be glad to talk you through this simple process.
User’s Manual for DYNO-MAX 2010 version 10.20
To download a free printable copy of the current DYNO-MAX Users Manual to your PC, click on this Zipped “DYNO-MAX_Users_Manual.exe” link! It’s a printable version (in .pdf format) of the program’s On-Line Help. Although lengthy, reading the entire manual is the best way for power users to learn many useful DYNO-MAX 2010 features. Tip: If you already have the latest version of DYNO-MAX on a CD, then this same .pdf file is under its “DYNO-MAX 2010 Users Manual” folder.
Attention: Manual is over 1,600 pages long! 13 megabytes (approximate download time with 56k modem = 45 minutes).
Tip: The above file is compressed. After downloading you will need to “double click” on it (i.e. from Windows Explorer). This action expands it into a “.pdf” file that you can then open with the Adobe’s free Acrobat 10.1.2 Reader for viewing or printing.
Phone or E-mail Support**
Current Priority Phone Support members are encouraged to contact our support technicians via any of the methods below.
(603) 226-DYNO or outside the USA at +1-603-226-DYNO (from Monday thru Friday, 8:00 am to 6:00 pm Eastern Standard Time). or e-mail – firstname.lastname@example.org
Tip: If your dyno’s PC has an e-mail program installed, you can even use DYNO-MAX’s “File – Send To – E-mail Current Run to Land & Sea…” menu selection. It automates e-mailing runs to our support technicians and engineers for assistance. (This e-mail option is only for DYNO-MAX licensees under a current Priority Support Plan.)
Re-licensing DYNO-MAX Software
About “second-hand” DYNO-MAX copies re-licensing and reporting software piracy.
For DYNO-MAX license sign-on name changes, contact email@example.com
**DYNOmite Users Forum (free)
The DYNO-mite Users Forum is an alternative no-charge support option available to all DYNO-MAX licensees.
Miscellaneous third-party file downloads
Win2PDF – a low-cost PDF output Printer Driver (by Dane Prairie Systems), for creating e-mail ready “,pdf” files of DYNO-MAX’s Reports and Graphs. This is an easy way to send customer’s their reports via the Internet. Files are compatible with any Adobe Acrobat Reader. Download a free trial version (for non-commercial use) of this program.
Resco Explorer, which is required for use with Pocket DYNO-MAX, provides the required network file read/write capability that Microsoft left out of Windows Mobil. Download a free trial version of this must-have File Explorer replacement program.
Extended-Range Bluetooth to USB Transceiver Drivers (for part # 435-175) for XP and Vista (32 or 64 bit) may be downloaded from this link. Note: The drivers for Windows 7 (32 or 64 bit) are already included with that operating system.