2020 Trade Shows are cancelled so let DYNOmite bring them to you...

Trade Show Update

10/30/2020

Trade Shows have been cancelled for 2020 and we are disappointed as you are. But in anticipation of this reality, we have been working hard to create a new-to-the-world virtual booth for our devoted Customers. You will hear more about this in the next weeks, but look for:

  1. Live streaming content with industry experts
  2. Demonstrations with service techs of our equipment
  3. Live chat with Sales and Service staff to discuss industry needs and innovations
  4. Watch as some of the most popular SuperFlow and DYNOMite products are being built
  5. the coolest opportunity the industry has ever experienced – YOUR chance to interact with our Innovation team to finalize versions of software and controls

DYNOmite views this year as an opportunity to engage with you in ways we haven't been able to in the past. Please visit our show page to register for additional information as it becomes available.

850 UTV/Formula SAE Inertia Dyno

Chassis Dynamometers | Inertia-Only |

Overview

850* inertia-only unit includes: heavy-duty formed steel and diamond-tread frame with low-profile 16″-diameter x 64″ extra-wide medium-inertia roll assembly – with machined-in “traction grooves,” mobile casters, leveling pads, tie downs, dual quick-remove ramps, DYNOmite-Pro data-acquisition computer, inductive RPM pickup, DYNO-MAX software, 28-channel data harness, temperature thermistor, banner, accessories package, and manual (less PC).

Specs

DYNOmite Data-Acquisition Computer  

Hardware configuration

Expandable, hybrid (surface-mount and thru-hole) multi-layer board system

Voltage requirements (DAQ only)

Runs on 120-volt 60-Hz AC, 240-volt 50-Hz AC, or 12-volt DC (specify)

Approvals

CE and/or UL approved (per locale)

Board type and channel capacity

 Pro, PC linked − 28 channel

Expansion capacity upgrades

Optional 56 or 112+ channel capable subsystem

Data rate

User-selectable rates up to 200 (1,000 optional) recordings per second (per channel)

Transducer wiring interface

Quick-disconnect data harness − 28-channel

Calibration

Non-volatile setup memory

Atmospheric correction rate

Standard, SAE, DIN, JIS, ECE, J1995, Custom

Gear-ratio RPM and shifting compensation

Smart Ratio™ automatic ratio calculation with multiple, simultaneous, RPM inputs

Recording features

Smart Record™ automated recorder triggering

Data interface

User selectable, USB or RS-232 serial port, output to a PC − via DYNO-MAX “Lite” software (included)

Third-party data-output interface options

Free Windows driver for National Instrument’s Lab View™ available

Temperature sensor

0 to 255 Fahrenheit [-18 to 124 Celsius] thermistor (included)

Standard and optional sensor inputs

RPM and torque (standard) − frequency, flows, pressures, thermocouples, thermistors, 0-5 volts, Lambda, smoke opacity, position, etc. (optional)

Standard and optional control outputs

Ignition shut-off, relay control, load-control stepper output, 0-5 volt D/A, etc. (optional)

Roller Frame  

Configuration

Extra-wide medium-inertia, ~16″ [~40 cm] diameter (nominal) roll

Mechanical frame construction

Fully-welded monocoque steel frame, leveling pads, removable diamond-plate access panels, access anchoring points, greaseable bearings (pit-plate optional)

Track width (max / min)

64″ [163 cm]

Installation

Above ground with integral leveling pads and wheels, or in ground with (optional) deck plate and integral anchoring points

Ramps

Heavy-duty, lightweight-aluminum, ramps (included)

Pneumatic requirements (for air brakes only)

90 PSI [600 kPa] @ 3 CFM [5 meter^3/hr]

Power requirements, frame only (option)

115-volts AC @ 60-Hertz [or 230-volts @ 50-Hertz] (specify voltage) for optional electric wheelbase-adjuster actuator

Axle Weight Capacities  

Maximum dynamic load

1,000 pounds [453 kg] (per axle)

Maximum static load

1,000 pounds [453 kg] (per axle)

Rolls  

Effective inertia range

Medium inertia (to allow absorber simulations)

Minimum simulated vehicle mass

500 pounds [227 kg] typical (excluding absorption simulation)

Minimum balance tolerance

G2.5 via internal, multi-plane, dynamic spin balancing

Steel-roll construction

Monocoque with 360-degree welded end plates and 100% machine-finished thru-shafting

Roll-to-tire contact area’s surface finish

Machined-in “traction grooves” for maximum grip  (μ > 1.0) and tire life under high-power testing

Power Capacity (traction limited)*  

Notice

*Power capacity is unlimited, but subject to roll diameter-induced tire deformation (safety) and traction (efficiency) limits.

Rolling-road’s diameter at tire contact-patch

~16″ [~40 cm] (see tire manufacturer’s “dyno tire vs. roll-diameter safety guide”)

Tire deformation (due to roll’s diameter)

1¼” [32 mm]  tire indentation (approximate) required for 5″ contact-patch length on typical automotive tire

Maximum displayed power

Unlimited Hp [Kw] − real-time

Maximum inertial power (traction limited)

Unlimited Hp [Kw] (but subject to roll diameter’s tire deformation and traction limits)

Maximum tractive force (traction limited)

Unlimited lbs-force [kN] (but subject to roll diameter’s tire deformation and traction limits)

Typical inertial power range (traction limited)

6 to 385+ Hp (500 / 1.3″deform*μ*2wd) [4 to 287+ KW] limit @ μ = 1.0

Engine (and Absorber) Tachometers  

Range

0 – 32,000+ RPM real-time display (user reconfigurable)

Timing reference

Quartz-crystal calibrated

Resolution

1.0 RPM (typical)

Primary RPM signal

Supports direct connection to most standard vehicle tachometer sources

Signal compatibility

User adjustable trigger voltages − pulse type selectable from ½ to 12 PPR

Alternate signal sources

“Clamp-on” inductive (spark plug, injector, or coil) wire pickup (included)

Analog tachometer options

Optional optical RPM pickup

Dyno Speedometer  

Range

0.0 – 255.0 MPH [0.0 – 410.0 km/h] − real-time digital (user reconfigurable)

Timing reference

Quartz-crystal calibrated

Resolution

Better than 0.1 roll RPM (typical)

Standard signal source

Hall-effect pulse type for RPM/MPH pickup (standard)

Signal compatibility

User adjustable trigger voltages − pulse type selectable from 1 to 360 PPR standard

Speed Range (tire deformation limited)  

Rolling-road’s tire contact-patch diameter

~16″ [~40 cm] (see tire manufacturer’s “dyno tire vs. roll-diameter safety guide“)

Roll RPM vs. vehicle speed factor

21.0 RPM per MPH [13.0 RPM per km/h]

Digital speed range

0 – 255 MPH [0 – 410 km/h] real-time display (user reconfigurable)

Safe speed range (tire deformation limited)

6 – 163 MPH (186sr / 1.3″^.5deform) [10 – 262 km/h] (subject to roll diameter’s tire-deformation limits)

Approximate Dimensions and Weight (Do not cast any pits, etc. until system is on site)

Roller assembly

Wide-roll ~16″ [~40 cm] multi-bearing frame − eddy absorber

Width

72″ [183 cm]

Length (less ramps)

95″ [241 cm]

Length (with ramps)

202″ [513 cm]

Height (at roll/ramp deck)

16″ [40 cm]

Height (overall)

32″ [81 cm]

Weight

1,900 pounds [862 kg] (approximate uncrated − less ramps)

Dynamometer Control Software  

Features

Too many to list here − review DYNO-MAX specification pages and demo CD download

Notable trademarks

DYNO-MAX, Smart Ratio, Smart Record, Smart Load, Smart Braking, Smart Print, etc.

Software versions

DYNOmite EEPROM version # 9.977 plus DYNO-MAX version #10.23 (included)
Control Console and PC Options  

Computer housing

Optional enclosed (EMI/RFI resistant) rolling PC cabinet

Monitor

Optional “Pro” console with genuine Intel-equipped Dell PC and 17″ LCD display

Wireless remote operation

Pocket DYNO-MAX™ − wireless Windows Mobile™ PDA control software (included in DYNO-MAX “Pro“)

Data Collection Options  

Air/fuel ratio monitoring

Optional 9-19 range AFR exhaust-gas module with portable vacuum pump and tailpipe “sniffer”

Dynamometer control software

Optional DYNO-MAX software packages (see separate specifications page and demo CD)

Electronic throttle control

Optional unit allows PC to throttle road and track driving simulations (dead man or console mount designs)

Exhaust-emissions analyzer

Optional five-gas analyzer (O2, CO, CO2, HC’s, and NOX) via digital DYNO-MAX RS-232 link.

Temperature monitoring

Optional oil-temperature “dip stick” thermocouples

Weather station module

Optional weather station provides automatic entry of air temperature, barometric pressure, and relative humidity.

Other Options  

Eddy-current absorber and load control

Optional bolt-in overdriven eddy-current absorption load-control module with power-supply – for steady-state testing

Extended tire stop/support

Optional bolt-on extra-long wheelbase kit ( range)

Self starting

Optional starter motor and drive kit

Trailer

Optional integral (bolt on) trailer assembly with alloy wheels and DOT approved lighting, etc. (black powder coat)

Ventilation

Optional high-velocity blowers 1,000 or 1,600 CFM (120-volts @ 60-Hertz 1φ)

Model Number: #054-850-1K

Similar Products

×

Not able to find what you're looking for?

If you provide us with your name, email, and a brief description of what you're looking a customer service representative will get in touch. This also helps us determine what new content should be added to our site.